Samsung DP700A7D-S02US - Manual (Page 75)

74
Chapter 3.
Using the computer
Using the TV
(Optional)
3
When the auto scanning is complete, the default TV channel
will be run.
* To switch to digital TV channels from an analog channel,
click TV/AV.
Resetting the channels
Select Home > Settings > Channel. Then select Scan. The
scanned channels are saved.
If you encounter problems scanning channels, select Reset
TV Signal > One-click Wizard. Then, the scanning will be
performed again from the start.
Note on Configuration
The setup procedures may differ depending on the current •
type of your TV service.
You should set the product to the region and postal code
•
where your computer is currently installed.
If the TV signal provider setup screen appears, select the
•
correct provider. If the configured provider is not correct, not
all of the channels will be received or the TV picture quality
may be degraded.