Samsung LS24B750VSG-ZA - Manual (Page 27)

27
Using "MHL(Mobile High-Definition Link)"
2
2 Using "MHL(Mobile High-Definition Link)"
When the mobile device is in power-saving mode
When the mobile device is in power-saving mode, the following message will appear in place of the
MHL screen. To display the MHL screen, deactivate power-saving mode.
When the mobile device is not connected or does not support MHL
z
When the mobile device is not connected to the product or does not support the MHL function,
the following message will appear.
z If MHL mode is not activated, check the connection of the mobile device.
z
If MHL mode is not activated, check if the mobile device supports MHL.
z
If MHL mode is not activated even though the mobile device supports MHL, update the firmware
of the mobile device to the latest version.
The indicated time "3 sec later" may vary depending on the mobile device.
MHL device is in sleep mode.
MHL device is not connected or
the device doesn't support MHL.
MHL MHL
3 sec later
Check Signal Cable
HDMI2/MHL