Samsung LS24B750VSG-ZA - Manual (Page 28)

28
Using "MHL(Mobile High-Definition Link)"
2
2 Using "MHL(Mobile High-Definition Link)"
2.1.2 Disabling "MHL"
Disabling MHL by using the [MHL] button
When MHL is active, press the [MHL] button. The MHL function will be disabled.
The input source changes automatically only when a cable is connected to a port other than [HDMI IN 2
/ MHL].
When the cable is disconnected or the mobile device is powered off
If the MHL cable is disconnected or the mobile device is powered off when MHL is active, the MHL
function will be disabled.
z If the MHL cable is disconnected, the product will display the message Check Signal Cable and
remain in MHL mode.
z
The indicated time "3 sec later" may vary depending on the mobile device.
DSUB/HDMI1 MHL
[MHL]
DSUB
(or HDMI1)
MHL MHL
Check Signal Cable
HDMI2/MHL
MHL
%JTDPOOFDU
EFWJDF
PS
1PXFS
PGG
MHL device disconnected.
3 sec later
MHL
Check Signal Cable
HDMI2/MHL