Samsung BD-E5400-ZA - Manual (Page 16)

16
playlist
1. To move to the Music List, press the 5
or RETURN button.
The Music List screen appears.
2. Press the ▲▼◄► buttons to move
to a desired track, and then press the
yELLOW (C) button. A check appears
on the track.
Repeat this procedure to select
additional tracks.
3. To remove a track from the list, move to
the track, and then press the yELLOW
(C) button again.
The check on the track is cancelled.
4. When done, press the v button.
5. To go to the Music List, press the
RETURN button.
✎ NOTE
` You can create a playlist with up to 99 tracks
on Audio CDs (CD-DA).
Playing Photo Contents
You can play photo contents located on a
DVD, CD, or a USB storage device.
Using the Tools menu
During playback, press the TOOLS button.
Slide Show Select to start the slide show.
Background
Music
Select to listen to music while
viewing a slide show.
Zoom
Select to enlarge the current
picture. (Enlarge up to 4 times)
Rotate
Select to rotate the picture. (This
will rotate the picture either
clockwise or counter clockwise.)
Information Shows the picture information.
✎ NOTE
` Depending on the disc or storage device, the
Tools menu may differ.
` To enable the background music function, the
photo file must be in the same storage media
as the music file.
However, the sound quality can be affected
by the bit rate of the MP3 file, the size of the
photo, and the encoding method.
` You can't enlarge the subtitle and PG graphic
in the full screen mode.
Appendix
Troubleshooting
Before requesting service, please try the following solutions.
PROBLEM SOLUTION
No operation can be
performed with the remote
control.
• Check the batteries in the remote control. They may need replacing.
• Operate the remote control at a distance of no more than 20 feet.
• Remove batteries and hold down one or more buttons for several minutes
to drain the microprocessor inside the remote control to reset it. Reinstall
batteries and try to operate the remote control again.
Disc does not play. • Ensure that the disc is installed with the label side facing up.
• Check the region number of the Blu-ray Disc/DVD.
Disc Menu does not appear. • Ensure that the disc has disc menus.
The prohibition message
appears on the screen.
• This message appears when an invalid button is pressed.
• The Blu-ray Disc/DVD’s software doesn’t support the feature (e.g., angles).
• You’ve requested a title or chapter number or search time that is out of range.
Play mode differs from the
Setup Menu selection.
• Some of the functions selected in the Setup Menu may not work properly if
the disc is not encoded with the corresponding function.
The screen ratio cannot be
changed.
• The Screen Ratio is fixed on your Blu-ray Disc/DVD.
• This is not a problem with the player.
No audio. • Make sure you have selected the correct Digital Output in the Audio Options
Menu.
The screen is blank. • If the HDMI output is set to a resolution your TV cannot support (for example,
1080p), you may not see a picture on your TV.
• Press the @ button (on front panel) for more than 5 seconds with no disc
inside. All settings will revert to the factory settings.
• When the factory default settings are restored, all stored user BD data is
deleted.
c Select ( ) Jump Page ' Return
1/2 Page Music TRACK 001
CD
TRACK 001
02:38
TRACK 001
02:38
TRACK 001
02:38
TRACK 001
02:38
TRACK 001
02:38 TRACK 001
02:38
TRACK 001
02:38
TRACK 001
02:38
TRACK 001
02:38
TRACK 001
02:38