Samsung YP-ST5Z-XAA - Manual (Page 7)

13
Connecting yepp to PC Connecting yepp to PC
12
2 Click [Next] in the series of windows that appear.
1 Connect the USB cable to the USB port on the computer.
2 Connect the other end of the USB cable to
the USB cable connection port on the bottom
of the player.
● If you disconnect the USB cable from your
PC while implementing a command or
initializing during USB driver installation,
your PC may not function correctly.
3 The USB driver is installed with a message saying
that it is searching for a new device. You may not
see the display screen during installation.
Go to the device manager to check that installation
has been successfully completed.
4 Upon installation of the USB driver
"Samsung yepp YP-ST5 USB Device" will appear
in the
[System Properties] ➝ [Device Manager] .
N N
N N
I Connecting yepp to PC with USB cable
Continued...
USB connect cable
ST5 AME ENG0.0 9/30/04 10:0912:0 Page 12