Samsung HG40NC690DFXZA - Manual (Page 37)

37
English
¦ USB Software Upgrade Method
Samsung may offer upgrades to the TV’s SW in the future. Please contact the Samsung Hospitality Hot line at 1-866-894-
0524 to receive information about downloading upgrades and using a USB drive to update the SW by connecting the USB
drive containing the upgrade to the USB port located on the TV.
When the software is upgraded, video and audio settings you have made will return to their default (factory) settings. We
recommend you clone the hospital settings so that you can easily reset them after the upgrade.
To upgrade the TV's software, follow these steps:
1. Insert a USB drive containing the SW upgrade into the
USB port on the side of the
TV.
2. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Support, and then press the ENTER E button.
3. Press the ▲ or ▼ button to select SW Upgrade, and then press the ENTER E
button.
The message "Scanning for USB. This may take more than 1min." is displayed.
4. The message "Upgrade version XXXX to version XXXX? The system will be reset
after upgrade." is displayed.
Press the
◄ or ► to select OK, and then press the ENTER E button.
Please be careful to not disconnect the power or remove the USB drive while upgrades are being applied. The TV will turn off
and turn on automatically after completing the SW upgrade. Please check the SW version after the upgrades are complete.
¦ Soundbar(AirTrack)
y Samsung Soundbar(AirTrack) and Hospitality TVs in 2014
– Samsung Soundbar(AirTrack) and hospitality TVs support the HDMI ARC feature If you connect a compatible Samsung
Soundbar(AirTrack) to a compatible Samsung hospitality TV using a single HDMI cable, guests can listen to the TV's
sound through the Soundbar(AirTrack).
– The item of Soundbar(AirTrack) Out in Hospitality Option Menu makes you control to where the TV sound is outputted
when the TV is turned on.
If Sound bar Out is On, the TV sound is automatically outputted in the Soundbar(AirTrack) device only whenever TV is
turned on.
If Sound bar Out is Off, the TV sound is automatically outputted in the TV speaker only whenever TV is turned on.
– Samsung Soundbar(AirTrack) products compatible with Samsung Hospitality TV through the HDMI ARC function are
more than 4 series models having been launched from 2012.
y Setting the Soundbar(AirTrack) to Hotel Mode.
1. Set the following Hotel menu options:
– Hotel option > External Device > Sound Bar Out = On.
– Hotel option > Power On > Power On Volume = User Defined.
– Hotel option > Power On > Power On Volume Num > Set greater than 0.
– Hotel option > Power On > Max Volume > Set greater than 0.
2. Connect an HDMI cable from the HDMI OUT jack on the back of the Soundbar(AirTrack) to the HDMI2 port (supporting
ARC) on the hospitality TV.
3. After the Soundbar(AirTrack) is connected to the hospitality TV, when the TV turns on, the Soundbar(AirTrack)
automatically detects the TV, and then automatically switches to Hotel Mode.
Soundbar(AirTrack) Hotel mode functional characteristics:
y Power On/Off is synchronized with the TV
y HDMI_CEC defaults set to On
y Functions through the “HDMI OUT” port only
y Disables the "Input mode" key on the VFD to prevent unexpected audio-source changes.
y Acquires adjustable Power On and Max Volume settings from the TV’s Hotel option menu. Soundbar's Power
On Volume and Max Volume values, however, are ½ of Power On Volume and Max Volume settings in the TV's
Hotel option menu. Example: If the TV's Power On Volume=20 and Max Volume=90, then Soundbar's Power On
Volume=10 and Max Volume=45.
[HC690_ZA]Install_Guide_00ENG.indd 37 2014-03-21 1:25:52