Samsung VC12F70HNHR-AA - Manual (Page 13)

Operating cleaner _13
03
O
PERA
TING
CLEANER
POWER BRUSH (SC12F70P Series)
Vacuuming with the power brush
1. Attaching the power brush
• The hose must be plugged into the
canister and the power brush must be
plugged into the hose and extension
wand.
2. Vacuuming
• For best results, move the power brush
slowly using short, overlapping strokes.
• For heavily soiled areas, repeat strokes in
several directions.
CAUTION
Do not invert the power brush while it is running.
3. Checking the performance of the power brush
You can check whether the power brush is operating correctly by lifting up the
extension tube slightly to view the back of the brush.
The power brush will not operate when it is jammed or the unit is turned off.
If the power brush is jammed, unplug the power cord from the electrical outlet.
Turn the power brush over and remove the jammed object.
Turn the power brush back to the vacuuming position and resume vacuuming.
Overload protector
The overload protector shuts off the brush
motor if the floor brush becomes obstructed.
The floor brush will stop, but the suction
motor will continue to run. To reset the
overload protector, turn the vacuum off and
unplug it. Clear the obstruction from the floor
brush area. Use a pen tip to press down
the reset switch. Turn the vacuum on and
continue cleaning.