Samsung SGH-T589HBBTMB - Manual (Page 166)

161
Connecting to a Wi-Fi Network
1. Press ➔ and then tap (Settings) ➔
Wireless and networks ➔ Wi-Fi settings.
The network names and security settings (Open network or
Secured with WEP) of detected Wi-Fi networks display in
the Wi-Fi networks section.
2. Tap the network you wish to connect to.
Note: When you select an open network you are automatically connected.
3. Enter a wireless password (if necessary).
Manually Add a New Network Connection
1. Tap Add Wi-Fi network.
2. Enter the Network SSID (the name of your Wireless Access
Point).
3. Tap the Security field and select a security option. This
must match the current security setting on your target
WAP.
4. Enter your WAP’s password if the WAP is secure.
5. Tap Save to store the new information and connect to the
target WAP.
Note: No prompt to enter the WAP key displays if this is the second time to
connect to a previously accessed or secured wireless network. The
WAP key is required when the device is reset using factory default
settings.
Deactivating Wi-Fi
1. Press ➔ and then tap (Settings) ➔
Wireless and networks ➔ Wi-Fi settings.
2. Tap the Wi-Fi field to deactivate the feature. The
checkmark grays.
Note: Use of wireless data connections such as Wi-Fi and Bluetooth can
reduce battery life and use times.
Manually Scan for a Wi-Fi Network
1. Press ➔ and then tap (Settings) ➔
Wireless and networks ➔ Wi-Fi settings.
2. Press and then tap Scan.