Samsung SCH-R450ZKACRI - Manual (Page 43)

Understanding Your Contacts 40
4. Highlight the particular information you want to add or
change.
• Press to backspace and delete numbers or letters.
• Press and hold to clear all numbers or letters in the highlighted
field.
• Press the Options soft key. The following options popup in the
display:
– Set Speed Dial / Remove speed dial — Assign/remove a speed dial
number (see “Speed Dial” on page 44. for more information).
– Set as default — Set the number the phone will dial when Contacts
dialing, speed dialing, or voice dialing.
– Wait — A hard pause (waits for input from you).
– 2-Sec Pause — A 2-second pause after which dialing resumes (see
“Add Pauses to Contacts Numbers” on page 40. for more
information).
Select the desired option.
5. When you’re finished changing the contents of a field,
press . Your changes are saved and a confirmation
message appears in the display.
Add Pauses to Contacts Numbers
Calls to automated systems such as banking services often
require a password or account number. Instead of manually
entering these numbers, you can store them in a Contacts entry
with the phone number and with special characters called
pauses, up to a maximum of 32 digits.
• Wait — Stops the calling sequence until the phone receives further
input.
• 2-Sec Pause — Stops the calling sequence for two seconds, then
sends the remaining digits.
Note: You can enter multiple Waits to extend the length of a pause. For
example, two consecutive Waits cause a total pause time of four
seconds. Keep in mind that pauses count as digits towards the 32-digit
maximum.
To add pauses to a Contacts entry number, do the following:
1. Find the Contacts entry associated with the number you
want to include one or more pauses. See “Finding a
Contacts Entry” on page 37 for more information.
2. Select and edit the desired number. See “Editing a
Contacts Entry” on page 39 for more information.
3. Press the Options soft key. The following pause options
appear in the display:
• Wait — A hard pause (waits for input from you).
• 2-Sec Pause — A 2-second pause after which dialing resumes.
4. Select the pause option of your choice to it into the number
sequence.
OK