Samsung SCH-R450ZKACRI - Manual (Page 100)

97
Use the navigation keys to highlight the Choice List
behavior you prefer, then press the key to accept the
new setting.
Sensitivity
1. From the Voice SVC menu, select Voice Settings ➔
Sensitivity. The Sensitivity screen appears in the display.
2. Use the Up/Down navigation key to adjust the Sensitivity
setting to Reject More spoken commands or names or to
Reject Less spoken commands or names.
3. To accept the new setting, press the OK soft key.
Digit Dialing
If you regularly have trouble with VoiceSignal not recognize the
numbers you say, try adapting digit dialing to your voice.
Adapting can improve the accuracy of digit recognition,
especially for people with strong regional accents.
Note: After you adapt Digit Dial, your phone is customized to your voice, and
your voice only. Others will not be able to use it unless they reset the
phone to factory defaults.
Adaptation involves recording several sequences of four digits
each. The recording process takes about a minute.
Tips for Adapting Digit Dialing
• Use Adapt Digits in a quiet place.
• Make sure you wait for the beep before starting to speak.
• Speak clearly, and say each digit distinctly.
• If you make a mistake while recording a sequence of digits, or if there
is an unexpected noise that spoils the recording, re-record that
sequence.
• Only adapt digits if you are regularly having problems with digit dialing.
Once you adapt, digit dialing will not work as well for other people
using your phone. (You can always reset digit adaptation to its original
state, as described below.)
Adapt Digits
To adapt digit dialing, do the following:
1. From the Voice SVC menu, press Voice Settings ➔ Digit
Dialing. The following options appear in the display:
• Adapt Digits
• Reset Digits
2. Select Adapt Digits. Your phone displays the first digit
sequence and “Please say” plays through the speaker
followed by the four digits appearing in the display.
OK