Dialing font size, Banner, Backlight – Samsung SCH-R450ZKACRI User Manual
Page 105
Changing Your Settings 102
The following options appear in the display:
2.
Highlight the desired setting, then press
to save the
setting.
Dialing Font Size
Dialing Font Size lets you select the size of displayed dialed
numbers.
1.
At the Settings menu, select Display Settings
➔
Dialing
Font Size. The following options appear in the display:
• Normal
• Large
2.
Highlight the desired font size, then press
to save the
setting.
Banner
Create your own personalized text greeting that appears in the
display while your phone is in standby mode.
1.
At the Settings menu, select Display Settings
➔
Banner.
The Banner text entry screen appears in the display.
Note: If necessary, press and hold the
key to erase an existing banner.
2.
Enter a word or short phrase (up to 12 characters) to
appear in your phone’s display while in standby mode. (For
more information, refer to “Entering Text” on page 33.)
3.
To save the new banner, press
. To discard your
changes, press the Cancel soft key.
Backlight
You can set the backlight for your display or keypad to remain on
or off or to remain on for a specified period of time.
Note: Prolonged backlight use drains your battery faster.
1.
At the Settings menu, select Display Settings
➔
Backlight. The following sub-menus appear in the display:
• Main Display — Sets the amount of time the main display
backlight remains on with the phone idle. Optional settings are 7,
15, and 30 Seconds and Always On (this setting uses much more
power than the timed settings) and Always Off.
• Keypad — Sets the amount of time the keypad backlight remains
on with the phone idle. Optional settings are 7, 15, and 30 Seconds
OK
OK
OK