Samsung SCH-R450ZKACRI - Manual (Page 94)

91
1. From the Tools menu, select Calculator. The Calculator
appears in the display.
2. Enter the first number in your equation using the keypad
(numbers can be up to nine digits long).
• Press to enter a decimal point. (Calculator only accepts 2
digits after a decimal point.)
• Press to change the sign for a number to a negative.
3. Use the Navigation key to set the type of calculation that
you wish to perform. Your choices are as follows:
• Up navigation key — [x] Multiplication
• Left navigation key — [-] Subtraction
• OK key — [=] Equals/Total
• Right navigation key — [+] Addition
• Down navigation key — [÷] Division
4. Use the keypad to enter the second number into your
equation.
For additional equation entry options, press the Operator
soft key. The following options appear in the display:
• ( — Beginning of nested equation
• ) — End of nested equation
• Power — Raise the entered number to a power
5. Press to perform the calculation and view the result.
To perform another calculation, press the Clear soft key.
Stop Watch
You can use this menu to set a stop watch.
1. From the Tools menu, select Stop Watch.
2. Press to start, stop, and resume the stopwatch count.
3. Press the Record soft key at the start of each succeeding
event/lap to record the completion time for the previous
event/lap.
4. Press the Reset soft key to erase all stop watch (lap) times
recorded.
Converter
The conversion menu provides the following conversion
categories:
• Currency
• Length
• Weight
• Volume
• Area
• Temperature
To convert a currency, length, weight, volume, area, or
temperature, do the following: OK
OK