Samsung LS22B150NS-ZM - Manual (Page 33)

33
Preparations
1
1 Preparations
1.3 Installation
1.3.1 Attaching the Stand (S19C150N / S19C150F / S20C150FL / S20C150NL /
S22C150N / S19C325N PLUS / S19G325N PLUS / S19H325N PLUS / S19R325N
PLUS / S20C325B PLUS / S20G325B PLUS / S20H325B PLUS / S20R325B PLUS)

Before assembling the product, place the product down on a flat and stable surface so that the
screen is facing downwards.
 The exterior may differ depending on the product.
Insert the stand neck into the
stand base in the direction
shown in the figure.
Check that the stand neck is
firmly connected.
Tightly fasten the connecting
screw at the bottom of the
stand base.
Place a soft cloth over the table
to protect the product and
place the product onto the
cloth so that the front of the
product is facing downwards.
Hold the main body of the
product with your hand as
shown by the figure.
Push the assembled stand into
the main body in the direction
of the arrow as shown in the
figure.
- Caution
Do not hold the product upside
down only by the stand.