Samsung SC-HMX20C-XAA - Manual (Page 34)

22_ English
USING THE DISPLAY ( )/ iCHECK BUTTON
Switching the information display mode
You can switch between the on-screen information display modes:
Press the Display ( )/ iCHECK button.
The full and minimum display modes will alternate.
• Full display mode: All information will appear.
• Minimum display mode: Only operating status indicators will appear.
If the HD camcorder has warning information, a warning message will appear.
Checking the remaining battery and recording capacity
• When the power is on, press and hold the Display ( )/ iCHECK button.
• When the power is off, press the Display ( )/ iCHECK button.
• After a while, the battery time and approximate recordable time according to the storage and quality appear for
about 10 seconds.
• The selected storage media is highlighted. If a memory card is not inserted, its icon is grayed out.
• Display ( )/ iCHECK button does not work in the menu or quick menu screen.
• When the battery power is insufficient to perform iCHECK, “Low Battery”
message appears.
• When your memory card cannot be recognized in case of Card Error, Not
Supported or Not Formatted card (page 108), the screen displays “Unknown”
message next to the memory card indicator.
preparation
Remaining battery (approx.)
Recordable memory capacity (approx.)
Battery
Memory (Super Fine)
0%
80 Min
50% 100%
070 Min 070 Min