Samsung RM255BARB-XAC - Manual (Page 26)

26
REMOVING THE REFRIGERATOR DOORS
How to Disassemble the Arctic Select Zone Door
1) Open the Arctic Select Zone Door. 2) Take out the box in the Arctic Select
Zone.
3) Remove the phillips screw holding it to
the liner on the left side of the rail.
4) Remove the phillips screw holding it to
the liner on the right side of the rail.
5) Pull out the door carefully to the end
to separate it.
If you pull out the door com-
pletely, you will find the phillips
screw which is located in the
center of the rail on the liner.
When you assemble the Arctic Select Zone Door, follow the contrary order.
NOTE
NEXT-PJT IB (D01516A) 2005.10.26 3:46 PM 페이지26