Samsung RF4287HAPN-XAA - Manual (Page 14)

14_ operating
USING THE CONTROL PANEL
If you do not press any button(letters not ICON), the
display turns off in a few seconds.
If you press any button(letters not ICON) , the display
lights up again.
The Function key will operate only when you touch
the letters.
( 10 ) Filter ( 10 ) Filter
Water fi lter usage
1. Normally the fi lter indicator is blue,
yellow, or green when you purchase or
install your refrigerator, depending on
your model.
2. After you use about 270 gallons of water,
the fi lter indicator turns Light Pink. (about
5 months)
3. After you use about 300 gallons of water,
the fi lter indicator turns Red. (about 6
months)
4. Remove the old water fi lter and install
a new one when the fi lter indicator is
red. Reset the fi lter indicator by pressing
Alam/Hold 3 sec for Filter Reset button
for 3sec. The fi lter indicator turns blue,
yellow, or green when you reset the
indicator.
(Blue) (Blue)
(Reset the indicator) (Reset the indicator)
(Red) (Red)
• If water is not dispensing or dispensing
slowly, you need to replace the water
fi lter because the water fi lter is clogged.
• Some areas have large amounts of lime
in their water, which causes the water
fi lter to clog more quickly.
CHANGING THE WATER FILTER
To reduce risk of water damage to your
property DO NOT use generic brands of
water fi lters in your SAMSUNG Refrigerator.
USE ONLY SAMSUNG BRAND WATER
FILTER. SAMSUNG will not be legally
responsible for any damage, including, but
not limited to property damage caused by
water leakage from use of a generic water
fi lter. SAMSUNG Refrigerators are designed
to work ONLY WITH SAMSUNG Water Filter.
The Filter light turns red to let you know when it is time
to change your water fi lter cartridge.
To give you time to get a new fi lter, the red light comes
on just before the capacity of the current fi lter runs
out.
Changing the fi lter on time provides you with the
freshest, cleanest water from your refrigerator.
1. Shut off the water supply. Then, turn the
water fi lter ( 1 ) about 1/4 turn, counter-
clockwise.
2. Pull the water fi lter ( 1 ) from the case fi lter
( 2 ).
• To change the water fi lter more easily, shut
off the water supply valve.
• Sometimes, it is hard to disassemble the water
fi lter because impurities in the water cause it to
stick. If you are having diffi culties, grip the water
fi lter fi rmly and pull it hard.
• When you pull the water fi lter, a little water can
leak from the opening. This is normal. To minimize
the water leaks, keep the fi lter cartridge horizontal
when you pull it.
• To prevent overfl ow, empty the water tray fi lter ( 3 )
and dry around of case fi lter ( 2 ).
3. Insert the new fi lter into
the fi lter case ( 4 )
4. Push the fi lter, and then
turn it clockwise until it
locks.
• If you are in trouble of inserting the water
fi lter as high pressure of water, shut off the
water supply valve.
• The locked symbol should be lined up with the
indicator line.
5. press the "Alarm/hold 3 sec for
Filter Reset" button (
(Filter Reset) (Filter Reset)
)
for about 3 seconds to reset the
water fi lter. The color of indicator
(
) changes from red to blue,
green, or yellow.
(Red) (Red)
2
1
3
2
WARNING
4
DA68-01922A.indb 14 DA68-01922A.indb 14 2013.3.4 1:32:47 PM 2013.3.4 1:32:47 PM