Samsung LF19BKBLB-ZA - Manual (Page 33)

Select "Setting/Control Panel" on the "Start" menu and then double-click "Add/Delete a program".
Select Multiscreen from the list and then click the "Add/Delete" button.
PCoIP
On Screen Display (OSD)
The On Screen Display (OSD) local GUI (Portal only) is displayed to the user when the device is
powered on and a PC-over-IP session is not in progress. The OSD provides a mechanism to connect
to a host device via the Connect Screen. The Connect Screen is presented to the user on startup.
The Connect Screen also allows access to the Settings Window. The Settings Window is accessible
through the Settings button on the Connect Screen. An administrative password is required to change
Portal settings.
Connect Screen
The Connect Screen is shown on startup except when the Portal has been configured for a managed
start-up or auto-reconnect.
The logo displayed above the Connect button can be changed by uploading a information on updating
the Connect Screen logo.
Connect Button
A user can select the Connect button to initiate a PC-over-IP or RDP session depending on the session
settings. While the PC-over-IP connection is pending, the OSD local GUI will display a “Connection
Pending” message. When the connection is established, the OSD local GUI will disappear and be
replaced with the session image.
Using the Software