Samsung SCX-8240NA-XAA - Manual (Page 35)

Setting up the hardware_ 34
3. Turn on the power switch.
• Some parts inside of the machine may be hot when power is on, or after printing. Be careful not to burn
yourself when working inside the machine.
• Do not disassemble the machine when it is turned on or plugged in. Doing so may give you an electric
shock.
If you need to turn the machine off, press the Power button for more than two seconds on the right side of the
control panel.
When the confirmation window appears, press Yes from the display screen, then wait until power is turned off
automatically.
If you turn the machine off directly using the power switch, it could cause the hard disk problem in the machine.
install_guide_english.book Page 34 Saturday, July 21, 2012 4:53 PM