Samsung SPN4235X-XAA - Manual (Page 30)

59
1 Press the MENU button. Press the UP or DOWN
button to select “Sound”, then press the ENTER
button.
2 Press the UP or DOWN button to select “Woofer”,
then press the ENTER button.
3 Press the LEFT or RIGHT button to select “On”.
• Pressing the LEFT or RIGHT button will alternate
between “On” and “Off.”
4 Press the UP or DOWN button to select “Volume”,
then press the LEFT or RIGHT button to adjust the
value of the item.
This sets the volume for the subwoofer.
5 Press the UP or DOWN button to select “Cutoff
Freq.”, then press the LEFT or RIGHT button to adjust
the value of the item.
This sets the cutoff frequency for the subwoofer.
For example, if you set the cutoff frequency at
130Hz, the subwoofer will reproduce frequencies
of 130Hz and lower.
6 Press the MENU button to exit.
Sound
Mode
Adjust
MTS
Auto Volume
Dolby Virtual
Woofer
Move Select Menu
Custom
Mono
Off
Off
Sound
Mode
Adjust
MTS
Auto Volume
Dolby Virtual
Woofer
Move Enter Menu
Standard
Mono
Off
Off
Woofer
Woofer
Volume
Cutoff Freq.
Move Select Menu
On
50
120Hz
Woofer
Woofer
Volume
Cutoff Freq.
Move Adjust Menu
On
50
120Hz
65 Volume
Woofer
Woofer
Volume
Cutoff Freq.
Move Adjust Menu
On
50
130Hz
58
Using Dolby Virtual
This feature allows the PDP’s optional L/R speakers to provide a Home Theater-like Dolby
effect. The center and surround sounds are mixed into the L/R speakers.
1 Press the MENU button. Press the UP or DOWN
button to select “Sound”, then press the ENTER
button.
2 Press the UP or DOWN button to select “Dolby
Virtual”.
3 Press the LEFT or RIGHT button to select “On”.
• Pressing the LEFT or RIGHT button will alternate
between “On” and “Off.”
4 Press the MENU button to exit.
Sound
Mode
Adjust
MTS
Auto Volume
Dolby Virtual
Woofer
Move Select Menu
Custom
Mono
Off
Off
Sound
Mode
Adjust
MTS
Auto Volume
Dolby Virtual
Woofer
Move Select Menu
Standard
Mono
Off
Off
Sound
Mode
Adjust
MTS
Auto Volume
Dolby Virtual
Woofer
Move Select Menu
Standard
Mono
Off
On
Using a Subwoofer
➤ ➤ Quick way to access the Surround: Just press the “SURROUND”
button on the remote control.