Samsung LS22EFHKFV-ZC - Manual (Page 7)

Connections
Connecting Cables
Connect the DC adapter for your monitor to the power port on the back of the monitor.
Plug the power cord for the monitor into a nearby outlet.
Use a connection appropriate for your computer.
Using the D-sub (Analog) connector on the video card.
• Connect the 'DVI-A to D-Sub' Cable to the DVI-I port on the back of your monitor.
Monitor [DVI IN] PC [D-sub]
Connected to a Macintosh.
• Connect the monitor to the Macintosh computer using the 'DVI-A to D-Sub' connection
cable.
Note
If you properly connect your monitor using the DVI-I connector but get a blank screen, check
to see if the monitor status is set to analog. Press power button to have the monitor double-
check the input signal source.
Using the Stand
Monitor Assembly