Samsung DV438AER-XAA - Manual (Page 20)

20_ installing your dryer
installing your dryer
DRYER EXHAUST TIPS
Plastic or non-metal flexible duct presents a potential fire hazard.
1. Make sure your dryer is installed properly so it exhausts air
easily.
2. Use 4” diameter rigid metal duct. Tape all joints, including at
the dryer.
Never use lint-trapping screws.
3. Keep ducts as straight as possible.
4. Clean all old ducts before installing your new dryer.
Be sure the vent flap opens and closes freely.
Inspect and clean the exhaust system annually.
Don’t let a poor exhaust system slow drying
by:
1. Restrict your dryer with a poor exhaust system.
2. Use a plastic, thin foil, or non-metal fl exible duct.
3. Use unnecessarily long ducts that have many
elbows.
4. Use crushed or clogged vent or ducts
WARNING
1 2
3 4
DUCT
TAPE
Wall
DUCT
EHAUST
Dryer
DV448AEG-02555A-10_EN.indd Sec5:20 DV448AEG-02555A-10_EN.indd Sec5:20 2011-10-06 11:20:50 2011-10-06 11:20:50