Samsung SM-N900TZWETMB - Manual (Page 19)

Getting Started 13
Charging the Battery
Your device is powered by a rechargeable Li-ion battery. A
wall charger, which is used for charging the battery, is
included with your device. Use only approved batteries and
chargers. Ask your local Samsung dealer for further details.
Before using your device for the first time, you should fully
charge the battery.
Note: Verify that the battery is installed prior to connecting the
wall charger. If both the wall charger is connected and
the battery is not installed, the handset will power cycle
continuously and prevent proper operation. Failure to
unplug the wall charger before you remove the battery,
can cause the device to become damaged.
Important! It is recommended you fully charge the battery
before using your device for the first time.
For more information, refer to “Enabling the USB 3.0
Connection” on page 223.
To connect a USB 3.0 cable to the device:
1. Connect the USB cable to the charging head.
2. Locate the Charger/Accessory jack.
3. Insert the USB 3.0 cable into the device’s
Charger/Accessory jack.
4. Plug the charging head into a standard AC power
outlet. The device turns on with the screen locked and
indicates both its charge state and percent of charge.
Warning! While the device is charging, if the touch screen
does not function due to an unstable power supply
unplug the USB power adapter from the power outlet
or unplug the USB cable from the device.
Charging Head
USB 3.0 Cable