Samsung CF21MSBU-XBM User Manual
Page 11
Advertising
Main > Introduction > Rear
Unpacking
Front
Rear
Bottom
(The configuration at the back of the monitor may vary from product to product.)
1. Power port
Connect the power cord for your monitor to the power port on the back of
the monitor.
2. Signal port
Connect the signal cable to the 15-pin D-sub connector on the back of
your monitor.
3. BNC Connectors
Connect the signal cable to the BNC signal port on the back of your
monitor.
Note: See
Connecting Your Monitor
for further information regarding cable connections.
Advertising
This manual is related to the following products: