Samsung SPH-D710ZKXSPR - Manual (Page 54)

Phone Calls 42
 Deactivate Speaker to use the phone ’s earpiece.
Warning: Because of higher volume levels, do not place the phone near your ear during
speakerphone use.
● Mute: Mute the microphone during an active call. Tap again to unmute the microphone.
Note: If Mute is activated, the speaker mode is deactivated.
● Bluetooth: Route the phone ’s audio through a connected Bluetooth headset (On) or
through the speaker (Off).
 When the call is routed to a Bluetooth headset, the current call area shows the
Bluetooth call icon .
Note: The Headset button is activated to show the current call is routed to the connected
Bluetooth headset.
 To route the current call back to the phone, tap Headset to temporarily use the
phone. Tap it again to route the call back to the connected Bluetooth headset.
 When Bluetooth or the Bluetooth headset is turned off, the call is routed through
either the earpiece or speaker.
● Press during a call to display a list of additional in-call features. Tap an option to
select it.
 Contacts: Display your contacts list.
Set Up Speed Dialing
Your phone can store up to nine phone numbers in speed dial locations.
Assign a Speed Number to a Contact
1. Press > > Contacts. Touch an entry to select it.
2. Touch > More > Set speed dial.
3. Touch the list menu under Number to select a number from the contact to assign to
speed dial.
4. Touch the list menu under Location to assign the number to a speed dial location.
5. Touch Save.