Samsung SPH-D710ZKXSPR - Manual (Page 162)

Web and Data 150
2. Tap the wireless network that the phone is currently connected to. You will see a
message box showing the Wi-Fi network name, status, speed, signal strength, and other
details.
3. The following icons show your Wi-Fi connection status at a glance:
 Wi-Fi is connected and active.
 Wi-Fi active but there is a communication issue with the target Wireless
Access Point (WAP).
Note: If you want to remove the phone
’s wireless network settings, tap Forget on this window.
You need to enter the settings again if you want to connect to this wireless network.
Connect to a Different Wi-Fi Network
The following information is designed to help you connect your device to a different Wi-Fi
network.
1. Press and then tap > Settings > Wi-Fi.
 Detected Wi-Fi networks are displayed in the Wi-Fi networks section. To manually
scan for available Wi-Fi networks, on the Wi-Fi settings screen, press and tap
Scan.
2. Tap another Wi-Fi network to connect to it.
Note: If the wireless network you want to connect to is not in the list of detected networks,
scroll down the screen, and tap Add Wi-Fi network. Enter the wireless network settings
and tap Save.
Data Services (Sprint 3G)
With your Sprint service, you are ready to start enjoying the advantages of data services. The
following topics will help you learn the basics of using your data services, including managing
your user name, launching a data connection, and navigating the Web with your phone.
Important! Certain data services requests may require additional time to process. While your
phone is loading the requested service, the touchscreen keyboard may appear
unresponsive when in fact it is functioning properly. Allow the phone some time
to process your data usage request.
Your Data Services User Name
Launch a Web Connection