Samsung SGH-T499MAWTMB - Manual (Page 136)

132
Manually Adding a Wi-Fi Network
1. Press ➔ and then tap
(Settings) ➔ Wireless and networks ➔ Wi-Fi
settings.
2. Tap Wi-Fi to turn it on.
3. Tap Add Wi-Fi network.
4. Enter the SSID (Service Set Identifier) and
Security settings then tap Save.
Note: An SSID is a unique key which identifies a wireless LAN.
Its purpose is to stop other wireless equipment from
accessing your LAN — whether accidentally or
intentionally. To communicate, wireless devices must be
configured with the same SSID.
Bluetooth settings
In this menu you can activate Bluetooth, view or
assign a device name, activate your phone so other
Bluetooth devices can discover it, or scan for other,
available Bluetooth devices with which to pair.
Activating Bluetooth
ᮣ Press ➔ and then tap
(Settings) ➔ Wireless and networks ➔ Bluetooth
settings and tap Bluetooth to turn it on.
Note: Bluetooth must be enabled prior to use.
Activating the Device Name
1. Activate Bluetooth.
2. Press ➔ and then tap
(Settings) ➔ Wireless and networks ➔ Bluetooth
settings ➔ Device name. The assigned device
name displays.
3. Press to erase the current device name
and enter a new name for this device using the
keyboard.
4. Tap OK to confirm your setting.
Activating Visibility
ᮣ Press ➔ and then tap
(Settings) ➔ Wireless and networks ➔ Bluetooth
settings ➔ Visible.
The phone is now activated for discovery for
119 seconds so you can pair with another
device. After 119 seconds the phone becomes
undiscoverable again.
Scanning for Devices
This option allows you to scan for active Bluetooth
devices so you can pair with them.
1. Press ➔ and then tap
(Settings) ➔ Wireless and networks ➔ Bluetooth
settings ➔ Scan devices. Your phone begins
scanning and lists any discovered devices in
the Bluetooth devices section.