Samsung SGH-T499MAWTMB - Manual (Page 129)

Connections 125
5. Copy files from the PC to the memory card.
Enabling USB Debugging
1. Press ➔ and then tap
(Settings) ➔ Applications.
2. Tap the USB debugging field to verify the
feature is active before connecting your USB
cable.
Wi-Fi
About Wi-Fi
Wi-Fi (short for "wireless fidelity") is a term used for
certain types of Wireless Local Area Networks
(WLAN). Wi-Fi communication requires access to an
existing and accessible Wireless Access Point (WAP).
These WAPs can either be Open (unsecured) as
within most Hot Spots, or Secured (requiring
knowledge of the Router name and password).
Note: After you complete a connection to an active Wi-Fi
network, the Wi-Fi Calling feature will automatically be
enabled.
Activating Wi-Fi
By default, your device’s Wi-Fi feature is turned off
(deactivated). Activating Wi-Fi allows your device to
discover and connect to compatible in-range WAPs
(Wireless Access Points).
1. Press ➔ and then tap
(Settings) ➔ Wireless and networks ➔ Wi-Fi
settings.
2. Tap Wi-Fi to activate the feature. A checkmark
indicates that Wi-Fi is active. The device scans
for available in-range wireless networks and
displays them under Wi-Fi networks on the
same screen.
Connecting to a Wi-Fi Network
1. Press ➔ and then tap
(Settings) ➔ Wireless and networks ➔ Wi-Fi
settings.
The network names and security settings
(Open network or Secured with WEP) of
detected Wi-Fi networks display in the Wi-Fi
networks section.
2. Tap the network you wish to connect to.
Note: When you select an open network you are automatically
connected.
3. Enter a wireless password (if necessary).
Manually Add a New Network Connection
1. Tap Add Wi-Fi network.
2. Enter the Network SSID (the name of your
Wireless Access Point).
3. Tap the Security field and select a security
option. This must match the current security
setting on your target WAP.