Samsung HPT5044X-XAA - Manual (Page 68)

English - 68
Wall- mount adjustment (Sold separately)
Once the wall mount is installed, the position of your TV can be easily adjusted.
Entering the menu
1 Press the ▲, ▼, ◄ or ► button on your remote control.
➢ The Wall Mount Adjustment screen is displayed.
➢ If the Wall Mount Adjustment screen is not displayed when clicking on a direction
button while watching your TV, use the menu to display that screen.
• Press the MENU button to display the menu. Press the ▲ or ▼ button to select
Setup, then press the ENTER button.
• Press the ▲ or ▼ button to select Wall-Mount Adjustment, then press the
ENTER button.
Remembering the Position
2 Adjust to the desired position using the ▲,▼,◄,► buttons.
➢ If you press an arrow button when no OSD is displayed on the TV screen, the
Adjustment screen appears.
➢ Press the INFO button to reset. Press the ◄ or ► button to select Yes, then
press the ENTER button. The position is initialized to the default setting.
3 Press the blue button.
Press the ▲ and ▼ buttons to select a save mode from either Position1, Position2
or Position3 in order to save the current position.
➢ To not save the current position, press the RETURN button.
➢ When selecting a save mode, you cannot use the Color buttons.
4 Press the ENTER button to save.
➢ When Position1 is selected, the message Current position saved as
Position1 is displayed.
5 Press the ENTER button.
➢ The saved Position appears on the left side of the OSD.
Moving to the remembered position
1 Complete Step 1 of Entering the menu.
2 Pressing a Color (Red, Green, Yellow) button moves the auto wall mount to the
saved position.
➢ You can move the wall mount to one of the 3 pre-set positions by pressing the
Red (Position 1), Green (Position 2) or Yellow (Position 3) buttons.
➢ If you adjust the positon after moving to a pre-set position, the position display
will disappear.
➢ For installation, refer to the Installation Manual provided with the wall mount.
➢ For product installation and the installation and moving of the wall mount, make sure to consult a specialized
installation company.
➢ This installation manual is to be used when attaching the wall mount to a wall. When attaching to other building
materials, please contact your nearest dealer.
➢ The auto wall mount will not work when Anynet+ is operating.
▲ More
Screen Burn Protection ►
HDMI Black Level : Normal ►
Film Mode : Off ►
Wall-Mount Adjustment ►
PIP ►
Function Help : On ►
SW Upgrade ►
Setup T V
Enter Move Return
Wall-Mount Adjustment
Position1
Adjust Center INFO
Position 1 2 3
Save
Wall-Mount Adjustment
Position1
Adjust Center INFO
Position 1 2 3
Save
Select a mode to Save.
Save
Position1
Enter Return Adjust
Position2
Position3
TV Rear Panel
Auto Wall-Mount
EX-LINK Cable (Not supplied)
RETURN
FAV.CH
BN68-01192T_Eng-2.indd 68 2007-09-10 ¿АИД 4:47:33