Samsung MM-D470D-ZA - Manual (Page 20)

20
English
Setup
HDMI Format
You can optimize the color setting from the HDMI
output. Select a connected device Type.
Monitor : • Select if connected to a Monitor via
HDMI.
TV : • Select if connected to a TV via HDMI.
Audio
DRC (Dynamic Range Compression)
This feature balances the range between the loudest
and quietest sounds. You can use this function to
enjoy Dolby Digital sound when watching movies at
low volume at night.
Settings
Move Select Return
DRC : 0
Audio Sync : 50 mSec
Display
Audio
System
Language
Security
Support
Full
6/8
4/8
2/8
Off
HDMI Audio
Audio Return Ch.
You can select either Full, 6/8, 4/8, 2/8, Off. •
AUDIO-SYNC
Video may fall out of sync with the audio when the
product is connected to a digital TV. If this
occurs, adjust the audio delay time to match the
audio to the video.
Settings
Move Select Return
DRC : 0
Audio Sync : 50 mSec
Display
Audio
System
Language
Security
Support
0 ms
25 ms
50 ms
75 ms
100 ms
125 ms
150 ms
175 ms
HDMI Audio
Audio Return Ch.
You can set the audio delay time between 0 mSec •
and 300 mSec. Set it to the optimal status.
HDMI AUDIO
The audio signals transmitted over the HDMI Cable
can be toggled On/Off.
On : • Both video and audio signals are transmitted
over the HDMI connection cable, and audio is
output through your TV speakers only.
Off : • Video is transmitted over the HDMI
connection cable only, and audio is output
through the product speakers only.
NOTE
✎
The default setting of this function is HDMI Audio Off.

HDMI Audio is automatically down-mixed to 2ch for

TV speakers.
When HDMI Audio is set to On, P.BASS doesn't work.

In the iPod mode, this menu is not available.

With HDMI AUDIO set to 'On', the volume can be

adjusted only using the TV remote control.
Audio Return Channel (ARC)
You can enjoy TV sound from the system's speakers
by using just one HDMI cable.
Off : • Turn the Audio Return Channel function off.
Auto: • Listen to TV sound from the system's
speakers if your TV is compatible with the Audio
Return Channel function.
NOTE
✎
When Anynet+ (HDMI-CEC) is Off, the Audio Return

Channel function is not available.
Using an ARC (Audio Return Channel)-uncertifi ed

HDMI cable may cause a problem in compatibility.
The ARC function is only available if an ARC-

compliant TV is connected.
MM-D470D-ENG-ZA-0608.indd 20 MM-D470D-ENG-ZA-0608.indd 20 2011-6-24 8:44:56 2011-6-24 8:44:56