Samsung AW0593L-XAA - Manual (Page 10)

E- 10
Airing Your Room
If you want to provide air circulation without cooling, you can use
the Fan mode.
If necessary, press the (On/Off) button.
Result:
Result: The unit beeps each time you press the button.
The air conditioner starts up in the Fan mode.
You can change modes at any time.
When the air conditioner is in the Fan mode, the temperature
cannot be set or displayed.
To set the fan speed:
Press the button on the unit one or more time until the
desired fan speed(F1, F2 or F3) is displayed.
To control the direction of the air flow, refer to page 24.
If the fan speed(F1, F2 or F3) is not displayed on the control panel:
Press the button on the unit one or more times until the fan speed
(F1, F2 or F3) is displayed.
1
2
3
4
Mode
Cool/Dry/Fan
Mode
Cool/Dry/Fan
Fan Speed
The air conditioner starts up in the cool mode.
The unit beeps twice.
E-
10
Airing Your Room
Power
Control Panel
F1:Low
F2:Medium
F1:High
F1:Low
F2:Medium
F1:High