Samsung RS2533SW-XAA - Manual (Page 25)

ADJUST THE CLEARANCE BETWEEN THE DOORS
Making small adjustments between doors.
If the door of the freezer is lower than that of the
refrigerator.
If the door of freezer is higher than that of the
refrigerator.
3) After adjusting the doors, turn the nut ( ①) turn clockwise( ) until the lower end of the bolt, then tight-
en the bolt again with the wrench ( ➂) to fix the nut(①).
If you do not fix the nut ( ①)firmly the bolt (➁) may be released
2) Please adjust the height difference between the doors turning the bolt (
➁) turn clockwise( ) or counter
clockwise ( ).
When you turn clockwise ( ), the door goes up.
➂ WRENCH
Adjustment part
➀ NUT
➁ BOLT
Adjustment part
➂ WRENCH
➀ NUT
➁ BOLT
➀ NUT
➁ BOLT
➂ WRENCH
➂ WRENCH
➂ WRENCH
➁ BOLT ➁ BOLT
Please open the doors and adjust the doors as follows:
1) Release the nut (
①) on the lower hinge until the upper end of the bolt (➁).
When you release the nut(
①), use enclosed hex wrench (➂) to turn the bolt(➁) a little counter-
clockwise to make the nut(
①) loose with your fingers.
➁ BOLT
➂ WRENCH
➀ NUT
NOTE
NOTE
DA68-00500W(0.3) 2003.6.17 2:52 PM 25