Samsung SC-MX20E-QVC - Manual (Page 24)

English _14
CONNECTING A POWER SOURCE
There are two types of power source that can be connected to your memory camcorder.
Do not use provided power supply units with other equipment.
- The battery pack: used for outdoor recording.
- The AC power adaptor : used for indoor recording and playing back. ➥page 21
Battery Pack installation / ejection
It is recommended you purchase one or more additional battery packs to allow
continuous use of your memory camcorder.
Inserting the battery pack
1. Slide and open the battery slot cover as shown in the figure.
2. Insert the battery pack into the battery slot until it softly clicks.
Make sure that the SAMSUNG logo is facing up while the set is placed as
shown in the figure.
3. Slide and close the battery slot cover.
Ejecting the battery pack
1. Slide and open the battery slot cover and push the battery lock.
Gently push the battery lock in the direction as shown in the figure to eject
the battery out.
2. Pull the ejected battery out in the direction as shown in the figure.
3. Slide and close the battery slot cover.
•
•
•
•
preparation
Store the battery pack separated from the memory camcorder while
not in use.
It is recommended to prepare an additional battery pack for prolonged
outdoor use.
Contact your nearest Samsung Electronics Service Centre for purchasing
additional battery pack.
•
•
•
CARD
CARD
CARD
Insert
Eject
[BATT. RELEASE]
Switch