Samsung UN32H5500AFXZA - Manual (Page 118)

112
Checking Current Program Info
Recording is not supported in the U.S.A and Canada.
To get information about a show, press
INFO
on your remote.
For the LED 7100 series, to get information about a show, press the KEYPAD button, and then select
INFO
on the On-Screen Remote.
"
To view the program info, you must first set the TV's clock. Go to Clock ( System > Time > Clock ).
"
The program information may vary depending on the type of incoming signal and may not be available at
all for certain programs.
Select the current program in the Program Info window to instantly record the program.
Use the ¡ and £ buttons to view information about upcoming programs. Select a program to set up a
Schedule Viewing
or
Schedule Recording
for that program.
For more information on Schedule Viewing , refer to "Setting Up a Schedule Viewing".
For more information on
Schedule Recording
, refer to "Recording Programs".
Changing the broadcast signal
MENU
>
Broadcasting
>
Antenna
Try Now
You can choose the appropriate DTV mode for your viewing environment. Choose
Air
or
Cable
.
Air
is
suitable for homes equipped with a separate, over-the-air antenna.
Cable
is suitable for homes that
have subscribed to a local cable-service or satellite-service provider.
"
Do not use this function if your TV is connected to a cable or satellite box.
Digital Channel Signal Info and Strength
MENU
>
Support
>
Self Diagnosis
>
Signal Information
Try Now
Select Support > Self Diagnosis > Signal Information . This displays the digital channel's signal
information and strength.
"
If your TV is attached to a separate, over-the-air antenna, you can use the signal strength information to
adjust the antenna for increased signal strength and improved HD channel reception.
"
Signal information is only available for digital channels.