Samsung ML-6512ND-XAA - Manual (Page 10)

Safety information_ 10
Installation / Moving
Warning
Do not place the machine in an area with dust,
humidity or water leaks.
► This could result in electric shock or fire.
Caution
Before moving the machine, turn the power off and
disconnect all cords.
Then lift the machine:
• If the machine weighs under 20 kg (44.09lbs), lift
with 1 person.
• If the machine weighs 20 kg (44.09lbs) - 40kg
(88.18lbslbs), lift with 2 people.
• If the machine weighs more than 40 kg (88.18lbs),
lift with 4 or more people.
► The machine could fall, causing injury or machine damage.
Do not put a cover over the machine or place it in an airtight
location, such as a closet.
► If the machine is not well-ventilated, this could result in fire.
Choose a flat surface with enough space for
ventilation to place the machine. Also consider the
space required to open the cover and trays.
The place should be well-ventilated and be far from
direct light, heat, and humidity.
When using the machine for a long period of time or
printing a large number of pages in a non-ventilated
space, it could pollute the air and be harmful to your
health. Place the machine in a well-ventilated space
or open a window to circulate the air periodically.
Do not place the machine on an unstable surface.
► The machine could fall, causing injury or machine damage. Make sure you plug the power cord into a grounded electrical
outlet.
► Otherwise, this could result in electric shock or fire.
The machine should be connected to
the power level which is specified on the label.
► If you are unsure and want to check the power level you are
using, contact the electrical utility company.
Do not overload wall outlets and extension cords.
► This can diminish performance, and could result in electric
shock or fire.
Use only No.26 AWG a
a. AWG: American Wire Gauge
or larger, telephone line cord, if
necessary.
► Otherwise, it can cause damage to the machine.
Use the power cord supplied with your machine for safe
operation. If you are using a cord which is longer than 2 meters
(6 feet) with a 140V machine, then the gauge should be 16
AWG or larger.
► Otherwise, it can cause damage to the machine, and could
result in electric shock or fire.
Be care when replacing paper or removing jammed paper.
► New paper has sharp edges and can cause painful cuts. This machine's power interception device is the power cord.
► To switch off the power supply, remove the power cord from
the electrical outlet.