Samsung LC27A750XS-ZA - Manual (Page 31)

31
Using "Central Station"
2
2 Using "Central Station"
4 Double-click the hub monitor to open the following screen.
If a connection is established between the product and PC, [ ] will appear over the signal intensity
bars as shown below and the product will display the PC screen. If [ ] does not appear, the
connection is not established between the product and PC.
5
Right-click in the Connected Monitor to open the menu page as below.
z
Disconnect : Disconnect Wireless between the product and PC.
z
Set as default : Give first priority to the product to connect to the PC once a Wireless signal is
detected. A star will appear beside the monitor icon if the product is set as the default monitor.
Ensure the wireless ID below "Monitor device" matches the wireless ID on the HUB menu
screen.
Wireless ID is a unique ID assigned to a monitor. The “SAMSUNG Central Station Setup”
program reads the ID and identifies each of nearby monitors. The ID is shown in the
“SAMSUNG Central Station Setup” program and in the lower part of the HUB menu.
A different ID (number) is displayed for each product. (The ID is displayed as shown below.)
5HWXUQ (QWHU 0RYH
86%6XSHU&KDUJLQJ
:LUHOHVV,'
2II
$/':$'