Setup and reset, 1 hub, 1 auto wireless detection – Samsung LC27A750XS-ZA User Manual
Page 66: Configuring auto wireless detection, 2 wireless connection, Auto wireless detection, Wireless connection
66
7 Setup and Reset
7
Setup and Reset
7.1
HUB
Configure the settings to use the HUB function on the product.
z
Refer to "2.1 About "Central Station"" for details about how to use the
HUB
function.
z
To open the
HUB
settings screen, press
HUB
on the stand.
7.1.1
Auto Wireless Detection
If the product is connected to a PC via Wireless USB, it will automatically detect the Wireless USB signal
and change the input source to
Wireless USB
mode.
Configuring Auto Wireless Detection
1
Press [
] on the product.
2
Press [
] to move to
SETUP&RESET
and press [
] on the product.
3
Press [
] to move to
HUB
and press [
] on the product.
4
Press [
] to move to
Auto Wireless Detection
and press [
] on the product. The following screen
will appear.
z
Off
: Deactivate the auto wireless detection mode.
z
On
: Automatically detect a Wireless USB signal and change the input source to
Wireless USB
mode.
5
Press [
] to move to the option you want and press the [
].
6
The selected option will be applied.
7.1.2
Wireless Connection
You can view the status of the Wireless USB connection between the product and a PC.
Select the
Wireless Connection
option. The input source will change to
Wireless USB
mode.
z
The connection status will be shown even when the input source is not
Wireless USB
mode.
z
Selecting
Wireless Connection
when a Wireless USB connection is established will change the
input source to
Wireless USB
mode.
m
Return
Enter
Adjust
HUB
Auto Wireless Detection
Wireless Connection
USB Connection
Analog
HDMI
USB Super Charging
Wireless ID
Off
On
Disconnected
Disconnected
2II
Disconnected