Samsung LS19C45KBRV-GO - Manual (Page 32)

32
Connecting and Using a Source Device
2
2 Connecting and Using a Source Device
Connecting USB

Applicable to the stand models that have USB ports only.

You can use a USB device such as a mouse, keyboard, Memory Stick, or external hard disk drive
by connecting them to the [ ] port of the monitor without connecting them to the PC.
The [ ] USB port of the monitor supports High-Speed Certified USB 2.0.
1
Connect the [ ] port of the monitor and the USB port of the computer with the USB cable.

To use [ ] port, you have to connect the UP (Upstream Cable) to the PC.

Make sure to use the USB cable supplied with this monitor to connect the monitor's [ ]
port and your computer's USB port.
2
Connect the [ ] port of the USB monitor and a USB device with the USB cable.
High speed Full speed Low speed
Data Rate 480 Mbps 12 Mbps 1.5 Mbps
Power Consumption
2.5 W
(Max., each port)
2.5 W
(Max., each port)
2.5 W
(Max., each port)
A
B
USB
B
A