Samsung SGH-A727ZKAATT - Manual (Page 81)

Changing Your Settings 78
Display & Light Settings
• Volume, Phone Sounds: allows you to select the volume at which the keypad
tone is played. This range is from 0 - 7.
Note: To save any changes made to this profile’s parameters, press the Options soft key. Highlight Save
and press the Select soft key.
Other Available Profiles
The phone can be set to additional audio profiles which are available via the Profiles
menu. Although each profiles has similarities, they have each been preset to use
different audio parameters for incoming phone call alerts, message alerts, and
phone usage. For more information, refer to "Icons" on page 14.
• The Silent profile causes the speaker to be muted and the phone only
vibrates and displays information. This icon is accompanied on screen
the Vibrate icon.
Note: The Silent profile can also be activated by pressing and holding the key. An on screen message
notifies you that the new Silent profile is now active. To deactivate this profile, press and hold the
key again.
• The Driving profile keeps the speaker is active. In this case, the speaker
is active and will launch the currently selected ringtone or melody
when the associated notification is activated. This icon is accompanied
on screen by the Driving icon.
• The Meeting profile causes both the speaker audio and vibration
features to be disabled and only information displays information.
This icon is accompanied on screen by the Audio icon.
• The Outdoor profile keeps the speaker active, the volume settings are
raised to their highest levels, any currently active ringtones or melodies
are activated, and the phone’s vibrate feature is activated. This icon is
accompanied on screen by the Vibrate/Audio icon.
• The Airplane profile allows you to use many of your phone’s features,
such as Games, Music, Notepad, Voice Memos, etc., but you cannot
send or receive any calls or access online information. This icon is
accompanied on screen by the Airplane icon.
Display & Light Settings
In this menu, you can change various settings for the display or backlight.
1. When the Idle screen displays, press the Menu soft key.
2. Select Settings and press the Select soft key or the key.