Samsung PN50B860Y2FXZA - Manual (Page 29)

Setting up the TV with your PC
Preset: Press the
N
SOURCE button to select PC mode.
Auto Adjustment
❑
Use the Auto Adjust function to have the TV set automatically adjust the video signals it
receives. The function also automatically fine-tunes the settings and adjusts the frequency
values and positions.
Press the
T
TOOLS button to display Tools menu.
You can also set the Auto Adjustment by selecting Tools → Auto Adjustment.
This function does not work in DVI-Digital mode.
N
Screen
❑
The purpose of the picture quality adjustment is to remove or reduce picture noise. If the
noise is not removed by fine tuning alone, then make the vertical frequency adjustments
on your PC and fine tune again.
After the noise has been reduced, re-adjust the picture so that it is aligned on the center
of the screen.
Coarse „
Adjusts the frequency when vertical noise appears on the screen.
Fine
„
Adjusts the screen to be clearer.
PC Position
„
Adjust the PC’s screen positioning if it does not fit the TV screen. Press the ▲ or ▼ button
to adjusting the Vertical-Position. Press the ◄ or ►button to adjust the
Horizontal-Position.
Image Reset
„
You can replace all image settings with the factory default values.
Brightness : 45
Sharpness : 50
Auto Adjustment ►
Screen
Advanced Settings
Picture Options
Picture Reset
Picture
English - 29
Screen
Coarse 50
Fine 4
PC Position
Image Reset
U Move E Enter R Return
PC Position
n Adjust E Enter R Return
BN68-850_Eng.indb 29 2009-06-18 �� 3:55:25