Samsung DV42H5600EG-AC - Manual (Page 25)

English - 25
03
OPER
ATION
4. Temp.
To select the correct temperature for the load, press the Temp. button. An indicator light will illuminate next
to the desired temperature. Press the button repeatedly to scroll through the settings.
High For sturdy cottons or those labeled Tumble Dry.
Medium
For permanent press, synthetics, lightweight cottons, or items labeled Tumble Dry
Medium.
Med Low For lower heat than Medium to dry synthetic or washable knit fabrics.
Low For heat sensitive items labeled Tumble Dry Low or Tumble Dry Warm.
Extra Low Provides the lowest heated dry temperature possible.
5. Time
When using Manual Dry cycles, you can adjust the drying time by pressing the Time selection button.
During the Sensor Dry cycle, the time light indicator is off because exact drying times are determined by
fluctuating humidity levels.
6. LED Display
The display window shows the estimated time remaining in the cycle after the Start/Pause button is pressed.
The estimated time remaining may fluctuate as the cycle progresses.
The Drying light will illuminate and remain lit until the cycle is complete.
When your dryer is in the cool-down phase, the Cooling light will illuminate.
When your dryer is in the wrinkle prevent phase, the Wrinkle Prevent light will illuminate.
When the cycle is complete, “End” will appear in the display panel until the dryer door is opened or the Power
button is pushed.
If your dryer is paused during a cycle, the indicator lights will blink until the Start/Pause button is pressed.
7. Power
Press once to turn your dryer on. Press again to turn it off. If your dryer is left on for more than 10 minutes
without any buttons being touched, the power automatically turns off.
8. Start/Pause
Press to pause and restart programs.
9. Indicators
Filter Check Sound Off
Drum Light
Vent Sensor (The Vent Sensor is only on the
DV45H6300* model.)
Child Lock Steam
DV6000HA_DC68-03380A.indd 25 2013-12-19 �� 1:07:51