Samsung WAM270-ZA User Manual
Page 41
`
When the Link Mate in use is connected using WPS or the Wi-Fi Setup method
1
Connect the HUB to your wireless router with a LAN cable, and then plug the HUB's
power cable into an electrical outlet.
2
Plug in the power cable of the new Link Mate. The new Link Mate's blue LED pairing
indicator starts to flash. Wait until the pairing indicator on the Link Mate stops flashing.
When the indicator stops flashing, pairing is complete. The Link Mate may also beep.
3
Turn off the old Link Mate by disconnecting the power cable. Then, reconnect it. Press
the
dEVICE Add
button on the back of the old Link Mate. The old Link Mate's blue
LED pairing indicator starts to flash. Wait until the pairing indicator on the Link Mate
stops flashing.
When the indicator stops flashing, pairing is complete. The Link Mate may also beep.
4
On your smart device, select the Samsung Multiroom app. Setup starts.
41
4444