Samsung SCS-26UC4 - Manual (Page 13)

Using Your Device 10
Components - Rear View
The rear of the Network Extender provides access to the WAN
port, power port, and external GPS antenna.
1. GPS Antenna Port slides to provide access to the external
GPS antenna for removal and relocation.
• A red GPS LED indicates a GPS signal could not be detected using
the internal GPS antenna. The external GPS antenna should be
connected. See “External GPS Antenna” on page 13.
2. Heat Vents provide passive ventilation for the Network
Extender and allow for dissipation of internally generated
heat.
Note: The Network Extender needs to remain vertical and in a well-ventilated
location. The vertical position allows proper air flow to the internal
components.
3. DC 12V Power Port provides power to the Network Extender
when connected to the AC power supply and cord
(included).
Warning!: Only use the provided power cord and supply. Using any other
power source may damage the Network Extender.
LED Function Description
PWR Power • Solid blue: normal
• No light: abnormal
SYS System connected • Solid blue: normal
• Solid red: abnormal
GPS GPS signal • Solid blue: normal
(GPS is received)
• Blinking blue or red:
while searching for GPS
• No light: abnormal (GPS
signal cannot be
received, the external
GPS antenna is
required)
WAN WAN (Ethernet) connection • Solid blue: normal
• Blinking blue: data
communication
• No light: abnormal
Verizon - WSE.book Page 10 Tuesday, February 9, 2010 12:25 PM