Samsung NP940X3G-K03US - Manual (Page 70)

Applications
70
9
Before the Samsung logo appears, press the F2 key several
times.
10
On the BIOS setup screen, access the Security menu.
11
Select TPM Configuration.
12
Set TPM State to Enable and Activate.
13
Select Save.
The computer restarts.
14
When the system reboots, press the corresponding keys by
following the on-screen instructions.
15
Select Save.
The computer restarts.
4
Select TPM Configuration.
5
Set TPM Device to Enabled.
6
Set TPM State to Clear.
7
Select Save.
The computer restarts.
8
When the system reboots, press the corresponding keys by
following the on-screen instructions.