Aastra Telecom 480i SIP - Manual (Page 8)

5 Model 480i SIP User Guide
Using the 480i Phone
Using the 480i Phone
Hard keys
There are hard keys on your
phone, such as Hold, Redial, Xfer,
Icom and Conf that are conÞgured
for these call-handling features.
These keys are static and cannot
be reprogrammed or changed.
They are located in two different
areas on the phone.
Note: The intercom feature is currently
not available in this version of the
480i IP phone.
Multiple Line and Call
Appearances
The 480i has 4 hard line/call
appearance buttons each with a
corresponding status light.
Additional line/call appearances
may also have been set up on your
phone as softkeys. To learn more
about this, please refer to the
Softkeys as Line/Call Appearances
section within this guide.
These line/call appearance buttons
and lights can represent physical
lines or calls for your extension.
By pressing a line/call appearance
button, you connect to the line or
a call it represents. The line/call
appearance light indicates the status
of that line or call. When the phone
is taken off-hook, the phone will
automatically select a line for you.
When you have more than one
call, you can use the left and right
navigation buttons (
3
and
4
) to
scroll left and right to the different
call information. Icons 3 and 4
will appear if there is call informa-
tion either left, right or both
sides of the current information
you are viewing.
The display will show what line
the call information is referring to
(L1, L2, L3, etc.), the Caller ID
information (name and number,
if available), the call status
(Connected, Ring, Hold etc.) and
the timer speciÞc to that call.
Hold Redial Goodbye
Options
1 2 ABC 3 DEF
Xfer
Conf
L1
L2 L3
L4
Icom
Services
Line/Call
Appearance
Behaviour Line/Call
Appearance
Status
Off Idle line or no
call activity
Light ßashes
quickly Ringing
Light ßashes
slowly Hold
Xfer
Conf
L1
L2
L3
L4
Icom
Services