Samsung LT23A350ND-ZA - Manual (Page 150)

◀ ▶ ◀
English
Issues Solutions and Explanations
The TV Signal Information
is unavailable in the Self
Diagnostic Test menu.
• This function is only available with digital channels from an Antenna / RF/
Coax connection.
The TV is tilted to the side.
• Remove the base stand from the TV and reassemble it.
The channel menu is greyed out
(unavailable).
• The Channel menu is only available when the TV source is selected.
Your settings are lost after 30
minutes or every time the TV is
turned off.
• If the TV is in the Store Demo mode, it will reset audio and picture
settings every 30 minutes. Change the settings from Store Demo mode
to Home Use mode in the Plug & Play procedure. Press the SOURCE
button to select TV mode, and go to MENU → System → Plug & Play
→ ENTER E .