2243sw/2243swx} self-test feature check, Self-test feature check – Samsung LS22MYZKFV-XAA User Manual

Page 121

Advertising
background image

A:

Windows XP:

Set the resolution in the Control Panel → Appearance and Themes → Display → Screen

Saver.

Set the function in the BIOS-SETUP of the computer. (Refer to the Windows / Computer

Manual).

A:

Windows ME/2000:

Set the resolution at the Control Panel → Display → Screen Saver.

Set the function in the BIOS-SETUP of the computer. (Refer to the Windows / Computer

Manual).

Q:

How can I clean the outer case/LCD Panel?

A:

Disconnect the power cord and then clean the monitor with a soft cloth, using either a

cleaning solution or plain water.

Do not leave any detergent or scratches on the case. Do not let any water enter the

monitor.

Note

Before calling for assistance, check the information in this section to see if you can remedy

any problems yourself. If you do need assistance, please call the phone number on the In-

formation section or contact your dealer.

{2243SW/2243SWX} Self-Test Feature Check

Note

Your monitor provides a self test feature that allows you to check whether your monitor is

functioning properly.

Self-Test Feature Check

1. Turn off both your computer and the monitor.

2. Unplug the video cable from the back of the computer.

3. Turn on the monitor.

If the monitor is functioning properly, you will see a box in the illustration below.

This box appears during normal operation if the video cable becomes disconnected or

damaged.

4. Turn off your monitor and reconnect the video cable; then turn on both your computer

and the monitor.

If your monitor screen remains blank after using the previous procedure, check your video

controller and computer system;

your monitor is functioning properly.

Troubleshooting

120

Advertising
This manual is related to the following products: