Samsung DVD-VR300-XAA - Manual (Page 2)

Antenna + Set-Top Box + DVD Recorder-VCR + TV : No Cable Box
OUT
RF
(TO TV)
DIGITAL AUDIO OUT
AUDIO OUT COMPONENT VIDEO OUT
OPTICAL COAXIAL
R Y
C B /P B
C R /P R
L
R
AUDIO AUDIO
LINE OUT LINE IN 1
VIDEO VIDEO
L
R
L
IN
(FROM ANT.)
OUT
RF
(TO TV)
R
L
R
L
DVD Recorder-VCR
TV
Connect the signal source to the STB
Use an antenna cable to connect the signal source coming from
the antenna or wall to the VHF/UHF RF IN jack on the STB.
Connect the STB to the DVD Recorder-VCR
Use the Video/Audio Cable to connect the LINE Out jacks on the
STB to the AUDIO/VIDEO LINE 1 IN jacks on the DVD Recorder-
VCR.
● For better picture quality, if your STB has an S-Video jack,
you can use S-Video cable instead of the yellow video jack
on the Video/Audio cable.
Connect the DVD Recorder-VCR to the TV
Use the Video/Audio Cable to connect the ANALOG AUDIO
OUT(R/L)/VIDEO OUT jacks on the DVD Recorder-VCR to the
Audio & Video jacks on the TV.
● For better picture quality, if your TV has an S-Video jack, you
can use S-Video cable instead of the yellow video connector
on the Video/ Audio cable.
● For the best picture quality, if your TV has Component video
jacks, you can use Component cables instead of the yellow
video connector on the Video/Audio cable. Press the
Progressive button on the front of your DVD Recorder-VCR to
480p/480i video output mode. If your TV supports progres-
sive scan, select 480p.
If you have an AV amplifier
Connect either audio cables from the ANALOG AUDIO OUT jacks
on the DVD Recorder-VCR to the LINE IN jacks on your AV ampli-
fier, or a digital cable from the DIGITAL AUDIO OUT (COAXIAL
or OPTICAL) jack on the DVD Recorder-VCR to the DIGITAL
AUDIO IN jack on your AV amplifier.
Antenna + Cable Box + DVD Recorder-VCR + TV
OUT
RF
(TO TV)
DIGITAL AUDIO OUT
AUDIO OUT COMPONENT VIDEO OUT
OPTICAL COAXIAL
R Y
C B /P B
C R /P R
L
R
AUDIO AUDIO
LINE OUT LINE IN 1
VIDEO VIDEO
L
R
L
IN
(FROM ANT.)
OUT
RF
(TO TV)
R
L
R
L
DVD Recorder-VCR
TV
Connect the signal source to the Cable Box
Use an antenna cable to connect the signal source coming from
the wall to the RF IN jack on your Cable Box.
Connect your Cable Box to the DVD
Recorder
Use an antenna cable to connect the RF OUT jack on your Cable
Box to the RF-IN jack on your DVD Recorder-VCR.
Connect the DVD Recorder-VCR to the TV
Use the supplied RF cable to connect RF-OUT on the DVD
Recorder-VCR to the ANT jack on the TV. Then use the Video/
Audio Cable to connect the ANALOG AUDIO OUT(R/L)/VIDEO
OUT jacks on the DVD Recorder-VCR to the Audio & Video jacks
on the TV.
● For better picture quality, if your TV has an S-Video jack, you
can use S-Video cable instead of the yellow video connector
on the Video/Audio cable.
● For the best picture quality, if your TV has Component video
jacks, you can use component cables instead of the yellow
video connector on the Video/Audio cable. Press the
Progressive button on the front of your DVD Recorder-VCR
to 480p/480i video output mode. If your TV supports pro-
gressive scan, select 480p.
If you have an AV amplifier
Connect either audio cables from the ANALOG AUDIO OUT
jacks on the DVD Recorder-VCR to the LINE IN jacks on your AV
amplifier, or a digital cable from the DIGITAL AUDIO OUT
(COAXIAL or OPTICAL) jack on the DVD Recorder-VCR to the
DIGITAL AUDIO IN jack on your AV amplifier.
2