Samsung SCH-R260DAAUSC - Manual (Page 234)

229
In the above example, if a hearing aid meets the M2 level rating and
the wireless phone meets the M3 level rating, the sum of the two
values equal M5. This is synonymous for T ratings. This should
provide the hearing aid user with "normal usage" while using their
hearing aid with the particular wireless phone. "Normal usage" in this
context is defined as a signal quality that is acceptable for normal
operation.
The M mark is intended to be synonymous with the U mark. The T
mark is intended to be synonymous with the UT mark. The M and T
marks are recommended by the Alliance for Telecommunications
Industries Solutions (ATIS). The U and UT marks are referenced in
Section 20.19 of the FCC Rules.
The HAC rating and measurement procedure are described in the
American National Standards Institute (ANSI) C63.19 standard.
M3 + M2 = 5 T3 + T2 = 5
r260.book Page 229 Friday, March 18, 2011 11:57 PM