Samsung SCH-R260DAAUSC - Manual (Page 52)

47
Dialing a Number
To dial a number using Voice Dial, do the following:
1.
In standby mode, press and hold .
“Say a Command” appears in the display and is pronounced
through the speaker.
2.
Say “Call”.
VoiceSignal prompts you to “Say the name or #”.
3.
Speak clearly and say the telephone number of the person you
want to call. For example, say “7 8 1 5 5 5 6 2 0 0."
If it recognizes the number, Voice Dial repeats and dials the
number. If Voice Dial is not sure it has recognized the number,
it displays a choice list of up to three numbers and prompts you
with “Did you say?” followed by the first number on the list.
4.
Say “Yes” to confirm the number or “No” to hear the next one,
or use the keypad to select the correct number from the list.
(For more information, refer to “Choice Lists” on page 54.)
•
To say the name again, press the Repeat soft key.
•
To exit Voice Dial without dialing, press .
r260.book Page 47 Friday, March 18, 2011 11:57 PM