Samsung SCH-R260DAAUSC - Manual (Page 57)

Call Functions 52
Voice Commands
To start VoiceSignal, do one of the following:
1.
In standby mode, press and hold .
“Say a Command” appears in the display and is pronounced
through the earpiece, followed by a list of available commands.
2.
At the Tools menu, select Voice SVC
➔ Voice Commands
.
Note:
You can also set your phone to start VoiceSignal when you open the phone.
(For more information, refer to “Voice Launch” on page 59.)
VoiceSignal includes the following commands:
–
Call
: Lets you dial the phone by saying any name stored in your contact list,
without ever having to record, or “train” that name. VoiceSignal
automatically voice-activates all your contacts, even if you have hundreds of
them stored on your phone. You can also dial any telephone number, even if
it is not stored in your contact list, by saying the digits in the number.
–
Send Text
: Lets you launch the Create Txt Msg screen. (For more
information, refer to “Creating and Sending Text Messages” on
page 108.)
–
Send Picture
: Lets you launch the Create Pic Msg screen. (For more
information, refer to “Creating and Sending Picture Messages in
Standby Mode” on page 113.)
r260.book Page 52 Friday, March 18, 2011 11:57 PM